customerservice@aberdeeninc.com
1-800-500-9526
Live Chat

JBOD A60

4U/60-BAY SAS12G DUAL CONTROLLER JBOD

 RESOURCES

Share On Social


High Performance Ultra Dense 4U Disk Expansion Unit

As an ultra-dense, scalable, and cost-effective disk expansion unit, JBOD-A60 is tailored to carry sixty (60) hot-swappable 3.5″/2.5″, 12Gb SAS3/6Gb SATA3, HDDs/SSDs in a 4U enclosure with up to 480TB of storage capacity. Major components including power supplies, fans, and SAS interface modules are redundant and hot-swappable with high availability. The design is optimized for the general-purpose needs of enterprise and hyper scale datacenters where the lowest operational cost-per-watt and smallest footprint are critical to ever increasing data storage needs.

Full Redundancy with No Single-Point-of-Failure

JBOD-A60 supports dual high-efficiency redundant power supplies and four hot-swappable fans, ensuring reliability and continuous availability in mission-critical datacenter environments. Hot-swappable redundant SAS interface modules provides dual data paths and ensure continuous operation. Ultra-high storage densities can present substantial mechanical engineering challenges from the sheer mass of rotating media. Interference from vibration caused by hard disk rotation is isolated to assure reliability and high performance. With its innovative coverless, top load HDD design, JBOD-A60 significantly reduces service and maintenance complexity.

  • 60 HDD in 4U (extreme drive density)
  • Four 12Gb SAS Host Interfaces
  • High Reliability, Serviceability and Availability
  • Full Redundancy with No Single-Point-of-Failure
  • Cost-effectiveness Shared Architecture
  • Innovative coverless, top load HDD design
  • Combination Trays for 2.5″/3.5″ HDD/SSD
Host Ports Four (4) 12Gb/s mini-SAS HD ports per controller
Drive Support
  • 60x (Top-Load) 3.5″/2.5″ Hot-swap HDD bays
  • Enterprise SAS/SATA HDD/SSD only recommended
Rack Support 4U, 19-inch rackmount
System LED
  • System ID LED
  • HDD status LED
  • System status LED
  • Fan/PSU/SIM/ISIM status LED
  • HDD Active and ID/Status LED
    Internal SAS Interface Module Status LED
    SAS Interface Module Status LED
High-Availability Features
  • 1400W High Efficiency Redundant PSUs, 200-240VAC, 50/60Hz, Platinum
  • Hot-swappable SAS Interface Modules (SIM)
  • Hot-swappable Internal SAS Interface Modules (ISIM)
  • Fan modules per system, two rotors in each Fan module
Power 1400W Platinum Redundant PS
Environmental
  • Operating temperature: 5°C to 40°C (41°F to 104°F)
  • Operating relative humidity: 50% to 93%RH
Dimensions 35.80″ x 17.60″ x 6.90″
909.3mm x 447mm x 175.3mm
**Without chassis ears / protrusions
Weight w/o HDD 80.11 lb. (36.34kg)
w/HDD 187.39 lb. (85 kg)
Package Dimensions 800mm (W) x 765mm (H) x 1150mm (D)

Aberdeen Reliability

Aberdeen brings an industry leading 5 Year Warranty to the table with aberdeen-5-year-warranty-200pxevery fully configured AberNAS rackmount server. Our custom configured rackmounts and along with our pre-configured Stirling line of servers and AberNAS network appliances come with a 5 Year Warranty standard unlike of some other companies’ 1 or 3 year warranties. Take advantage of the speed, storage and security of the AberNAS by Aberdeen.

Aberdeen C.A.R.E.S.aberdeen-care

Aberdeen offers a 30 day trial assessment program on completely configured servers and/or storage. We are so confident that once you try one of our custom configured rackmount servers you will not only be completely satisfied with the evaluation unit but will choose Aberdeen to fulfill all your future rackmount server needs.