OPHIR RF LINEAR AMPLIFIER MODULE
|
|
MANUFACTURER PART# |
5302034
|
View large schematic.
1.8 - 2.0 GHz
60 WATTS
12 WATTS CDMA
AMPLIFIER
|
|
ABERDEEN PART# |
RF506
|
FREQUENCY
RANGE |
1.8 - 2.0 GHz (Minimum)
Specifications @ VDD=+13VDC, T=25°C
|
INSTANTANEOUS
BANDWIDTH |
60 MHz
(Minimum)
|
|
POWER OUTPUT
|
CW: 60 Watts (Typical)
@ 1dB comp: 50 Watts (Minimum)
|
|
POWER OUTPUT CDMA |
12.0 Watt (Typical)
|
|
SMALL SIGNAL
|
Gain: 50 dB (Minimum)
Gain Flatness: ±0.5 dB (Maximum)
|
|
INPUT VSWR
|
2:1 (Maximum)
|
|
DC INPUT CURRENT
|
9 Amp @ 12W (Maximum)
|
INPUT/OUTPUT
CONNECTORS
|
SMA
Female
|
|
PHYSICAL CHARACTERISTICS
|
Dimensions: 6.55" x 4.0" x 1.1" (Maximum)
Weight: 2.0 lb. (Maximum)
|
|
FEATURES
|
Wide frequency band
Wide dynamic range
Excellent linearity
Single voltage power supply
Low distortion
Low noise figure
Small and lightweight
| DESCRIPTION:
Designed for linear applications in the PCS frequency range. This amplifier utilizes linear power devices that provide excellent linearity, high gain, and wide dynamic range. High efficiency operation is achieved by employing unique microstrip networks and advanced GaAs FET devices. Designed for high reliability with such features as built in voltage-regulated bias supply, EMI/RFI filters, custom-machined housing and heavy-duty components. Each unit undergoes extensive burn-in prior to final test and Q/A.
|
|
APPLICATIONS
|
PCS, WLL, GPS, digital applications
Lab and equipment testing
TWT replacement
RFI/EMI test
Laser modulation
Antenna Ranges
Satellite ground station
|
ELECTRICAL
CHARACTERISTICS
|
Input/Output Impedance: 50 Ohm
DC Input: +12 VDC
Optional 28V or 48V DC/DC Converter
Load VSWR: Open or Short all Phases
RF Input Overdrive: +10 dB over 1dB comp.
RF Input Signal Format: CW/AM/FM/PM/Pulse
Harmonics: -20 dBc typical @ 1 dB comp.
Spurious Signals: > -60 dBc
Class of Operation: A linear
|
ENVIRONMENTAL
CHARACTERISTICS
|
Baseplate Temperature: -20°C to +60°C
Humidity: 95% relative without condensation
Altitude: 10,000 feet
|
| |
|
|
