Home | Support | Order Status | Search | Newsletter | Channel Partners   Order Online or Call: 800-500-9526  
 --> Server & Rackmount Department  


 Search Help
 
 
  Config ID
  Desktops
  Servers
  Workstations

 
 
  Rackmount Solutions
  - Servers
  - Bare-Bones
  - Cabinets / Chassis
  - Accessories

  Storage Solutions
  - NAS
  - SAN / iSCSI
  - Scalable DAS
  - Storage Servers
 
 
  Cables
  Cases
  CD/ DVD
  CPUs
  Controllers
  Floppy Drives
  Disk Duplicators
  Hard Drives
  Input Devices
  Industrial Equipment
  Memory
  Modems
  Monitors
  Motherboards
  Multimedia
  Networking
  Power Supplies
  Processors
  Software
  Systems
  Tape Drives
  Video Cards
     Newsletter Subscription
 
  BIOS & Drivers
  Contact Manufacturer
  Sales Terms

 
 
  Channel Partners

 
  Press Releases
  Meet Our Team
  Employment
  Reference Accounts
  System Reviews
  System Awards


ACL-7122/PET-48DIO/ACL-7124
Opto-22 Compatible 144/48/24 DIO Cards

FeaturesACL-7122

  • 144 DIO High density on ACL-7122
  • 48 DIO with timer on PET-48DIO
  • 24 DIO on ACL-7124 for low cost 
  • TTL/DTL compatible digital I/O channels
  • Direct interface with OPTO-22 compatible I/O modules Emulates industry standard 8255 PPI (mode 0)
  • Buffered circuits for high drive capacity
  • Output status readback
  • Programmable interrupt handling
  • PC/AT bus with 11 IRQ levels
  • Compact size, SMT components

Specifications

Digital I/O

  • I/O channels: 
    • ACL-7122: 144 DIO channels
    • PET-48DIO: 48 DIO channels
    • ACL-7124: 24 DIO channels
  • I/O characteristics: TTL/DTL Compatible
  • Data transfer: Programmed I/O, InterruptPET-48DIO
Programmable Event Counter (PET-48DIO only)
  • Counter Chip: 85C53 or equivalent
  • Counter frequency: DC to 2MHz
  • Counter range" 16 bit down counter
  • Trigger edge" Rising or falling edge, programmable

Programmable Timer Pacer (PET-48DIO only)

  • Timer clock: on board 32.768 kHz or 2 MHz
  • Frequency divider: Programmable
  • Timer resolution: 32 bits (two 16 bit counters cascaded)
Interrupt ControlACL-7124
  • Available IRQ levels: (jumper selectable)
    • ACL-7122:11 IRQ levels 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15
    • PET-48DIO: 9 IRQ levels 3, 4, 5, 7, 9, 10, 11, 12, 15
    • ACL-7124: IRQ 2, 3, 4, 5, 6, 7 
  • IRQ sources: (Programmable)
    • ACL-7122: DIO Port C0, C3, C4
    • PET-48DIO: DIO Port C3, C7 or timer 
    • ACL-7124: DIO Port C0, C4
General Specifications
  • Operating temperature: 0° ~ 55°C
  • Storage temperature: -20° ~ 80°C
  • Humidity:5% ~95% non-condensing
  • Power consumption (without external devices):

  • ACL-7122
    • 1.40 A @ 5VDC (Typical)
    • 1.80 A @ 5VDC (Maximum)
    PET-48DIO
    • 720mA @ 5VDC (Typical)
    • 860mA @ 5VDC (Maximum)
    ACL-7124
    • 380mA @ 5VDC (Typical)
    • 450mA @ 5VDC (Maximum)
  • Transfer rate: 500 K bytes/sec 
  • PCB size:
    • ACL-7122: 183 mm x 119 mm
    • PET-48DIO: 170 mm x 121 mm
    • ACL-7124: 108 mm x 107 mm
  • I/O connector: 50-pin male ribbon connector
Termination Boards

Ordering Information

  • ACL-7122
  • 144-bit Digital I/O Card
  • PET-48DIO
  • Programmable 48-bit DIO, Event, and Timer Card
  • ACL-7124
  • 24-bit Digital I/O Card 
View Manual
View Specifications from Catalog

All PDF formated files in this website are best viewed using Adobe Acrobat Reader Version 4 and above. You can download a free copy from Adobe's Web Site.
DAQ189 PRICING
Part# Description Price  
DAQ189
NuDAQ ACL-7122 - Opto-22 Compatible 144 Channel ISA Digital I/O Card $159.99

 

 
©1996-2008 Aberdeen LLC. All rights reserved. All prices and specifications are subject to change without notice. All product names, registered trademarks, and trademarks are the property of their respective owners. Click here to view our privacy statement.
  Home | Contact | What's New | About | Policies | Confirmation Form | Privacy