Features

• 8 single-ended 12-bit analog input channels
• Software programmable input range: +5V, +2.5V, +1.25V, +0.625V, and +0.3125V
• Up to 30 kHz sampling rates with on-chip sample & hold
• One 12 bit monolithic multiplying analog output channel 
• 16 TTL compatible digital outputs
• 16 TTL compatible digital inputs
• 3 Programmable A/D trigger modes
• One board 8254 timer chip 
• Programmable IRQ level for A/D data transfer
• Compact size with rugged 37-pin D-type connector 

Specifications

Analog Input (A/D)

• ADC and resolution: 12 bit ADS574 or equivalent
• Number of channels: 8 single-ended channels
• Maximum sampling rate: 30 kHz 
• Input signal range: +5V, +2.5V, +1.25V, +0.625V, +0.3125V software programmable
• Over-voltage protection: + 35V maximum
• Input impedance: > 10M£[
• Trigger mode: Software, on-board programmable timer or external trigger
• Data transfer: Program control, interrupt control
• IRQ level: Programmable IRQ 2, 3, 4, 5, 6, 7
• External trigger: TTL compatible digital trigger

• DAC resolution: 12-bit, 7541A industry standard
• Conversion type: monolithic multiplying
• Number of channel: 1
• Voltage output range : 0~5V or 0~10V
• Reference voltage: -5V or -10V
• Setting time: 30 £g sec 
• Output drive: +5mA max.

• Number of channels: 16 DI channels and 16 DO channels
• I/O characteristics: TTL compatible

• Device: 82C54
• A/D pacer timer: 32 bit with 2MHz time base

• I/O base address: 16 consecutive address location
• I/O connectors: one DB-37 female connector and two 20-pin flat cable connectors
• Operating temperature: 0° ~ 55°C
• Storage temperature: -20° ~ 80°C
• Humidity: 5~95%, non-condensing
• Power consumption: 
• +5V @ 440mA typical, 500mA max.
• +12V @ 60mA typical, 75mA max.
• Dimensions: 158 mm x 108 mm

Termination Boards

• ACLD-9137 
• ACLD-9188 
• DIN-37D

Ordering Information

• ACL-8111
Multi-function Data Acquisition Card
• ACL-8111/37
ACL-8111+ACLD-9137

View Manual
View Specifications from Catalog