Features

• 32-bit PCI Bus, Plug and Play

• 32-CH single-ended, 16-bit differenial inputs

• 16-bit high resolution AD converter

• Bipolar analog input ranges

• On-board 1K words FIFO memory

• Auto-scanning channel selection

• Up to 100 KHz sampling rate

• Programmable gain of 1,10,100,1000 for PCI-9114 HG

• Programmable gain of 1,2,4,8 for PCI-9114DG

• Two trigger modes: software trigger & pacer trigger

• Isolated 16-CH digital output with high driving capability

• Isolated 16-CH digital input

• Compact size, half-size PCB

• Rugged DB-37 connector for analog input

• Two 20-pin connectors for digital input/output

Specifications

Analog Input (A/D)

• Converter and resolution:
  16-bit ADS7805 or equivalent

• Number of channels: 32 S.E./16 D.I.

• Analog signal input range: (programmable)

  • Bipolar: ±10V, ±1V, ±0.1V, ±0.01V for PCI-9114HG

  • Bipolar: ±10V, ±5V, ±2.5V, ±1.25V for PCI-9114DG

• Conversion time: 8Łg sec

• Data throughput: 100 KHz maximum for single channel

• Overvoltage protection: Continuous ±35V maximum

• Accuracy:

  GAIN= 1, 10	0.01% of FSR ±1 LSB
  GAIN= 100,1000	0.02% of FSR ±1 LSB

• Input impedance: 10 M

• Trigger mode: Software, Timer Pacer, and External trigger

• Data transfer: Polling, Interrupt

• FIFO depth: 1024 samples

Isolation Digital I/O

• Number of input channels: 16 DI

• Number of output channels: 16 DO

• Input voltage: 0-24Vdc

  • Logic H: 3~24V

  • Logic L: 0~1.5V

• Input resistance: 4.7K@ 0.5W

• Output type: Darlingtoin Transistors, open

• emitor with external power supply

• Driving capability: 350mA/ch typ. for 8-CH, single channel 500mA maximum.

• Isolation voltage: 5000 Vrms

Programmable Counter

• Device: 8254

• A/D pacer: 32-bit timer (two 16-bit counter cascaded together) with a 2 MHz clock base

• Pacer output: 0.00046 Hz~100 KHz

General Specifications

• Connectors:
  37-pin D-type connector for AI Two 20-pin flat cable connector for DIO

• Operating temperature: 0° ~ 60°C

• Storage temperature: -20° ~ 80°C

• Humidity: 5~95%, non-condensing

• Power requirement:

  • +5 V @ 600 mA typical

  • +12 V @ 100 mA typical

• Dimension:

• 200 mm x 107 mm

Termination Boards

• ACLD-9188

• ACLD-9137

• DIN-37D

Ordering Information

• PCI-9114DG
  32-CH, 16-bit, Normal Gain DAS Card

• PCI-9114HG
  32-CH, 16-bit, High Gain DAS Card
  Note: The above products are shipped with software development kit for DOS/Win-95/98/NT/2000, PCIS-LVIEW and PCIS-VEE.

View Manual
View Specifications from Catalog