Features

• 32-bit PCI-Bus, Plug and Play
• 32-CH single-ended or 16-CH differential inputs
• On-board low pass filter for signal conditioning or attenuation
• Isolation voltage: 2500Vrms 
• 12-bit A/D converter 
• Programmable gain of 1, 10, 100
• Sampling rate up to 100KHz for single channel
• Bipolar or Unipolar analog input ranges
• Trigger mode: software Trigger, Timer Pacer
• On-board 1024 samples FIFO memory
• Auto-scanning channel selection 
• Compact , half-size PCB
• Rugged DB-37 connector 

Specifications

Analog Input (A/D)

• Number of input channels:(jimper selectable)
• 32 single-ended 
• 16 differential input 
• A/D converter & resolution: 12-bit ADS774 or equivalent
• Conversion type: Successive approximation
• Input impedance: 
• 10 M£[ (without signal conditioning)
• Control by on-board low pass filter.
• Accuracy: 0.015% of reading +1 bit 
• Isolated voltage by photo-coupler
  2500 V rms continuous isolation 
• Input range: (jumper set range and programmable gain x1,10,100)

  20V Range

  • Bipolar: +10V, +1V, +0.1V

  10V Range

  • Bipolar: +5V, +0.5V, +0.05V

  • Unipolar: 0~10V, 0~1V, 0~0.1V

• Sample Rate: 100KHz maximum for single channel
• Non-linearity: +1 bit LSB
• Trigger mode: Software trigger, pacer trigger
• Data transfer: Polling, interrupt, FIFO half-full interrupt, FIFO polling

• Connector: DB-37 female connector
• Operating temperature: 0° ~ 55°C
• Storage temperature: -20° ~ 80°C
• Humidity: 5~95%, non-condensing
• Power consumption: +5V @ 960mA typical
• Dimensions: 173 mm x 102 mm

Termination Boards

• ACLD-9881
• ACLD-9137
• ACLD-9188
• DIN-37D

Ordering Information

• PCI-9113A
  32SE/16DI Isolation 12-bit A/D Card
• PCI-9113A/37
  PCI-9113A + ACLD-9137 
• PCI-9113A/81
  PCI-9113A + ACLD-9881
(includes 1m cable ACL-10137-1) 
Note: The above products are shipped with software development kit for DOS/WIn-95/98/NT/2000, PCIS-LVIEW and PCIS-VEE.)

View Manual
View Specifications from Catalog