Features

• 32-bit PCI-Bus, Plug and Play
• 8-CH voltage output for PCI-6208V
• 16-CH voltage output for PCI-6216V
• 8-CH voltage and current outputs for PCI-6208A
• 16-bit DA resolution
• Bipolar voltage output range ±10V
• Fast 2µ sec settling time from -10V~+10V for voltage output
• Current output range on PCI-6208A: 0~20mA, 4~20mA, 5~25mA programmable
• 4-CH DI, 4-CH DO
• Compact, half-sized PCB
• Rugged DB-37 connector

The PCI-6208 Series products are analog output cards with high resolution and high density. All these products are based on the basic version, PCI-6208V. These cards can be used to replace the old ISA bus analog output cards, and can provide better resolution as well

as PCI plug and play function.

PCI-6208V

The PCI-6208V can offer 8 identical voltage outputs channels. Each channel provides ±10V voltage outputs and 16-bit resolution, 14-bit accuracy is guaranteed. Therefore, this card can cover all of the 12bit uni-polar or bipolar applications. The unique features of the card can achieve high density of 8 channels and create best performance/cost ratio.

PCI-6216V/EXP-8V

PCI-6216V is a higher density voltage output card. It combines the PCI-6208V and EXP-8V expansion board together. The EXP-8V provides extra 8 voltage output channels, therefore, the PCI-6216V can be extended up to 16 channels.

D/A Converter: PCM-56

All of the PCI-6208/16 analog output channels are identical. Each one is equipped with the PCM-56 which is a state-of-the-art, fully monotonic, digital to analog converter. This device employs ultra-stable nichrome (NiCr) thin-film resistors to provide monotonicity, low distortion, and low differential linearity error over long period of time.

PCI-6208A/EXP-8A

The PCI-6208A is a high performance, 16-bit current and voltage output card, combining PCI-6208V with EXP-8A. The EXP-8A includes 8 precision voltage-to-current converters / transmitters, which converts PCI-6208V voltage output into current source output. Each current output channel is pro-grammable of 0- 20-mA, 4-20mA, or 5-25mA ranges.

Applications

• Industrial process control

• Pressure / temperature transmitters

• Current source for test equipment

• Servo control

• Function generator

• Communication by current signal

Specifications

Voltage Output (D/A)

• Number of Channels: 
• 8 channels (PCI-6208V)
• 8 channels (PCI-6208A)
• 16 channels (PCI-6216V)
• Resolution: 16-bit
• Output ranges: Bipolar +10V
• Conversion: PCM56U or equivalent monolithic multiplying 
• Settling time: 2 µ sec (-10~+10V)
• Voltage output driving: +5mA max.
• Data transfer: programmed control
• Monotonicity: 15-bit typical
• Gain error: +2.0% (without trimming)
• Output initial status: 0V (after RESET or POWER-ON)

• Number of channels: 8 channels 
• Output ranges: Programmable
• 0-20mA,
• 4-20mA,
• 5-25mA
• Converter: 
• Digital to voltage: PCM56 or equivalent
• Voltage to current : XTR110
• Settling time: 17 µ second
• Slew rate: 1.3 mA/ £gs
• Non-linearity: +0.01% of span
• Span error: initial 0.3% of span
• Output resistance: 10£[ max.
• Output initial status: 0mA (after RESET or POWER-ON)

• Number of channels: 4DI/4DO
• Signal characteristic: TTL General Specifications

• I/O connectors: 37-pin D-sub 
• Operating temperature: 0° ~ 50°C
• Storage temperature: -20° ~ 80°C 
• Humidity: 5 ~ 95%, non-condensing
• Power consumption: 
PCI-6208V
• +5V @530 mA typical
• +12V @90 mA typical
PCI-6216V
• +5V @1.2 A typical
• +12V @300 mA typical
PCI-6208V
• +5V @600 mA typical
• +12V @380 mA typical (with current output 20mA for 8 channels)
• PCB Dimensions: Compact and half-size 172 mm x 105 mm

Termination Boards 

• ACLD-9188
• ACLD-9137
• DIN-37D

Ordering Information

• PCI-6208V
8-CH Voltage Output Card
• PCI-6216V
16-CH Voltage Output card
• PCI-6208A
8-CH Voltage and Current Output Card 
Note: The above products are shipped with software development kit for DOS/WIn-95/98/NT/2000, PCIS-LVIEW and PCIS-VEE.)

View Manual
View Specifications from Catalog