|
|
| |
ABERDEEN XDAS 523F/SA - 3U/8TB
FIBRE-to-SAS/SATA REDUNDANT CONTROLLER RAID STORAGE SOLUTION
|
| |
|
|
RAID
- 800MHz PowerPC GL RISC
CPU, 1MB L2
- Hardware RAID parity
computing
- Hardware RAID5 & RAID6
parity computation
- Supports RAID 0, 1
(0+1) , 3, 5, 6, 10, 30, 50, 60, and NRAID
- RAID Migration
- Configurable stripe
size and write policy per array
- Multiple Global,
Dedicated, & Enclosure-specific hot-spares
- Intelligent Drive
Handling:
- In degraded mode: skips irreparable
blocks to continue rebuild
- In normal operation: data-block
verification and repair
System Components
Redundant, hot-swappable components ,
designed for no single point of failure
- Heavy duty 3U enclosure
- Dual- (R1430) RAID and I/O management
controller module
- Fault-tolerant modules interfaced
through a common backplane
- High availability SAS domains to hard
drives via expanders and port selectors
- One (1) 512MB DDR DIMM module (default,
supports up to 2GB in size)
- Redundant, hot-swappable 530W power
supply units
- Redundant, dual-speed cooling modules
- Sixteen (16), hot-swappable drive trays
- Two (2) forearm handles
- Li-Ion, life expectancy-aware battery
backup unit (BBU)
Host Interface
- Eight (8) 4G FC
- 4Gb/s via
short-/long-wavelength LC-type SFP
- Concurrent I/O
commands
- Tagged command queuing
up to 1024 Max
- command queue up to
1024
- Fault-tolerant host
links via onboard bypass
Drive Interface
- Sixteen (16) 3.0Gbps SAS, hot-swappable
drive trays
- Accommodates 1-inch pitch, 3.5-inch SAS
or SATA-II disk drives
- S.M.A.R.T. and NCQ support
- Automatic bad-sector reassignment
- Dedicated bandwidth to each connected
drive
Management
- COM1 serial port for local access to
firmware-embedded utility
- COM2 for UPS connection
- GUI, Telnet, and SSH system monitoring
via Ethernet
- Browser-based or Java-based RAIDWatch
manager software
- Firmware-embedded manager via RS-232C
(audio jack) that is platform independent
- Widest range of event notification
methods including email, LAN broadcast, fax, SNMP traps,
SMS, and MSN
- LCD keypad panel to all configuration
options
- Event log in reserved space;
Administrator's activity log
- Variable logical drive options per DIMM
size
SAN Management
Up to 1024 LUNs (if sufficiently large memory
is used with the proper settings)
Indicators
- Module status LED indicators:
- Two (2) per drive tray
- Seven (7) per controller module
- One (1) per power supply unit
- One (1) per BBU module
- Two (2) per cooling module
- Presence detect &
thermal sensors via I 2 C bus
|
Power Supply Module
Redundant hot-swappable power supplies with
PFC
| Input
|
100VAC at 9A, 240VAC at
4.5A with PFC (auto-switching) |
| 47 to 63Hz |
| Output |
(Maximum output: 530
Watts) |
| +12.0V |
32A max. |
| + 5.0V |
32A max. |
| + 3.3V |
30A max |
Cooling Module
Redundant dual-thermal-fan cooling modules
| Maximum air flow |
High speed: 90CFM
Low speed: 70CFM |
Environmental Specifications
| Operating temperature: |
5° to 40° C (35° C if
battery is applied) |
| Non-operating temperature: |
- 40° to 60° C |
| Relative humidity: |
5 to 95%, non-condensing |
| Operating altitude:
|
Operating: 0 to 10,000 ft |
Dimensions
- Without protrusions: 131H x 446.2W x
500D mm
- With protrusions: 131H x 485W x 532D mm
- Package dimensions: 476H x 592W x 695D
mm
System weight
- Net weight: 34kg
- Gross weight: 32kg (without drives)
|
|
Click images for larger versions.
FEATURES
S16F-R1430
-
Dual-active RAID controller
configurations
-
Fault-tolerant enclosure design
-
Fifth-generation ASIC400 RAID
engine
-
Two (2) 4G FC host channels per
controller
-
Four (4) host ports per
controller with onboard hub
-
SAS or SATA disk drives in
the sixteen (16) drive bays
-
Hardware RAID5 and RAID6
-
SAS 4x wide links (SFP-8470) to
expansion enclosures
-
S.M.A.R.T. and NCQ support
-
Supports expansion (1 RAID + 3
JBODs)
XDAS 1023J 16TB JBOD
XDAS 723J 12TB JBOD
-
Intelligent load-balancing
internally and externally between host links
-
Embedded, browser-based
RAIDWatch management tool
-
Windows Logo Certificated
Fibre-to-SAS/SATA RAID Subsystem
provides 4Gbps Fibre Channel interface for high-speed data
transfer. It is fully compatible with cost- effective SATA
hard drives to offer tremendous storage capacity.
Enterprise-class SAS drives are also supported for high
performance and availability. The storage capacity can be
further expanded by connecting the SAS 4x wide port to expansion
enclosures.
|
|
|
|
|
