Features

• 6 multiplying analog output channels
• 12 bit resolution, double buffered D/A converters
• Multiple Voltage Range (jumper selectable)
  • Bipolar: 5V, 10V,
  • Unipolar: 0~10V, 0~5V
• All D/A outputs are set to 0V after RESET or POWER-ON
• 16 digital input and 16 digital outputs
• Compact, half size
• Surface mount component design
• PC/AT Bus architecture
• IRQ Level: IRQ3,..., IRQ 15 from external interrupt source
• Register structure compatible with PCL-726

Specifications

Analog Output (D/A)

• Number of channels: 6
• Resolution range: 12-bit, double buffered
• Converter: DAC7541 AJP or equivalent monolithic multiplying
• Voltage output range:
• Unipolar: 0 ~ 5V or 0 ~ 10V
• Bipolar: +5V or +10V
• Reference voltage:
• Internal: -5V or -10V
• External: +10V or -10V max.
• Voltage output settling time: Max 30 µs (from -10V to +10V)
• Linearity: +1/2 bits LSB
• Accuracy: +0.012% full scale range
• Temperature drift: 5 PPM/ 0°C 
• Voltage output driving capability: +5mA max.
• Current loop (sink): 4 to 20 mA with external DC power supply, at 8V (min.) up to 36V (max.)
• Current output settling time: Max 70 £gs (from 4 to 20mA)
• Output initial status: 0V (after RESET or POWER-ON)

• Number of channels: 16 channels
• Level: TTL compatible
• Low: -0.5V min. to +0.8 max
• High: 2.4V min. to 5.0V max

• Number of channels: 16 channels
• Input logic low: Max. 0.8V
• Input logic high: Min. 2.0V

• I/O base address: 16 consecutive address locations
• I/O connector: DB-37 female and two 20-pin header connectors
• Operating temperature:0°~ 55°C
• Storage temperature: -20° ~ 80°C
• Humidity: 5~95%, non-condensing
• Power consumption:
• +5V @360mA typical
  450mA max
• +12V @60mA typical
  180mA max 
• -12V @20mA typical
  90mA max.
• Dimensions: 163 mm x 123 mm

Termination Boards 

• ACLD-9137
• ACLD-9188
• ACLD-9185
• ACLD-9182A
• ACLD-9178
• DIN-37D

Ordering Information 

• ACL-6126
6-CH, 12-bit Analog Output Card 
• ACL-6126/37
ACL-6126 + ACLD-9137

View Manual
View Specifications from Catalog